LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 334 ((Powertrain Control Module (Pcm) - Electrical Diagnostics - 65RFE Automatic Transmission - 1500)) >> Diagnosis And Testing >> P0933-Hydraulic Pressure Sensor Range/Performance >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) continuously monitors Actual Line Pressure and compares this to Desired Line Pressure. If the Actual Line Pressure reading is more than 172.4 kPa (25 psi) higher than the Desired Line Pressure, but is less than the highest Line Pressure used in the current gear, the DTC sets.

scientia non olet · About LEMON Manuals