Theory Of Operation
WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
The Transmission system uses five pressure switches to monitor the fluid pressure in the L/R, 2C, 4C, UD and OD clutch circuits. The pressure switches are continuously monitored for the correct states in each gear as shown in the table below.
PRESSURE SWITCH VS GEAR TABLE
| GEAR | L/R | 2C | 4C | UD | OD |
|---|---|---|---|---|---|
| REVERSE | OPEN | OPEN | OPEN | OPEN | OPEN |
| P/N | CLOSED** | OPEN | OPEN | OPEN | OPEN |
| 1ST | CLOSED* | OPEN | OPEN | CLOSED | OPEN |
| 2ND | OPEN | CLOSED | OPEN | CLOSED | OPEN |
| 2ND PRIME | OPEN | OPEN | CLOSED | CLOSED | OPEN |
| 3RD | OPEN | OPEN | OPEN | CLOSED | CLOSED |
| 4TH | OPEN | OPEN | CLOSED | OPEN | CLOSED |
| 5TH | OPEN | CLOSED | OPEN | OPEN | CLOSED |
| *L/R is closed if output speed is below 100 RPM in Drive and Manual 2. L/R is closed in Manual 1. **May be open when rolling in Neutral or at low oil temperatures. |
|||||