LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 334 ((Powertrain Control Module (Pcm) - Electrical Diagnostics - 65RFE Automatic Transmission - 1500)) >> Diagnosis And Testing >> P0726-Engine Speed Input Circuit Range/Performance >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

This DTC will set when the calculated engine speed is less than 390 RPM with the engine running or greater than 8000 RPM for 2.0 seconds. The PCM will place the Transmission in Limp-in when this DTC is set. NOTE: This is not a Transmission Input Speed Sensor DTC. 

scientia non olet · About LEMON Manuals