LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 328 (Radio Frequency (RF Hub) Module - Electrical Diagnostics - 1500) >> Diagnosis And Testing >> B215B-13-Ignition Run/Start 2 Control-Circuit Open >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Whenever the Radio Frequency Hub (RF Hub) senses an open on the F20 Ignition Run/Start Output circuit, this code will set.

scientia non olet · About LEMON Manuals