LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 326 (3.6L - DTCS P2314 To U1504 - 1500) >> Diagnosis And Testing >> U110A-Lost Communication With SCM (SAS) >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

The module has not received a Steering Control Module (SCM) Bus message for approximately two to five seconds. One trip fault. If the vehicle is equipped with the stop/start feature, the system will be disabled when this DTC is active.