LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 325 (3.6L - DTCS P1457 To P2311 - 1500) >> Diagnosis And Testing >> P2161-Vehicle Speed Sensor 2 Erratic >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) recognizes Vehicle speed input No. 2 erratic or high. VSS No. 2 is based on the average of the Front Wheel Speeds. One trip fault and the code will set within five seconds. No MIL and No ETC light. Cruise is disabled. If the vehicle is equipped with the stop/start feature, the system will be disabled when this DTC is active. 

scientia non olet · About LEMON Manuals