LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 324 (3.6L - DTCS P0572 To P1456 - 1500) >> Diagnosis And Testing >> P141D-Starter Relay Feedback Open Circuit Performance >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

The PCM monitors the Ignition Crank Sense circuit voltage. The Ignition Crank Sense circuit is connected to the Starter Solenoid Feed circuit inside the PDC. During an engine cranking event the PCM expects to see 12 volts at the Ignition Crank Sense circuit. If no voltage is detected a fault is set.

scientia non olet · About LEMON Manuals