LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 312 (Integrated Trailer Brake Module (ITBM) - Electrical Diagnostics - 1500) >> Diagnosis And Testing >> C10C7-00 Electronic Trailer Brake Control Output >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

If the Integrated Trailer Brake Module (ITBM) is configured incorrect or the ignition voltage is below 9v or greater than 16v, this code will set. Automatic braking and manual lever braking (squeeze switch) are disabled.

scientia non olet · About LEMON Manuals