LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 308 (8HP70 Automatic Transmission (Service Information0 1500) >> Seal, Torque Converter Hub >> Installation >> Installation

Seal, Torque Converter Hub: Installation: Installation

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installing Oil Pump Cover Oil Seal
GC0152261Courtesy of CHRYSLER GROUP, LLC
  1. Position the torque converter hub seal over the input shaft and against the transmission oil pump cover.
  2. Using (special tool #10375, Installer, Oil Pump Cover Oil Seal) install a new torque converter hub seal.
  3. Install the torque converter. Refer to TORQUE CONVERTER, INSTALLATION .
scientia non olet · About LEMON Manuals