LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 302 (Emissions Control - 1500) >> Evaporative Emissions >> Valve, Positive Crankcase Ventilation (PCV), 5.7L >> Installation >> Installation

Valve, Positive Crankcase Ventilation (PCV), 5.7L: Installation: Installation

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean out intake manifold opening.
  2. Check condition of two o-rings on PCV valve.
  3. Apply engine oil to two o-rings.
  4. Place PCV valve into intake manifold and rotate 90 degrees clockwise for installation.
scientia non olet · About LEMON Manuals