LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 298 (Occupant Restraint Controller (Orc) - DTCS B0001-11 To B0099-96 - 1500) >> Diagnosis And Testing >> B007E-13-Driver SEATBELT Retractor PRETENSIONER Deployment Control - Circuit Open >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

The Occupant Restraint Controller (ORC) monitors the resistance of the Driver Seat Belt Retractor Tensioner C1 circuits. The ORC will set this DTC if it detects high resistance on the Driver Seat Belt Retractor Tensioner C1 circuits for 2.6 seconds. The DTC will change from active to stored when the ORC monitoring shows the open circuit fault is gone for 2.6 seconds.

scientia non olet · About LEMON Manuals