LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 296 (Power Seats (Service Information) 1500) >> Motor, Seat Adjuster >> Removal >> Removal >> Rear Tilt Motor

Rear Tilt Motor

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Tilt Motor, Power Seat Adjuster Motor & Rear Tilt Motor
GC0087713Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the affected seat. Refer to SEAT, FRONT, REMOVAL or SEAT, FRONT CENTER, REMOVAL .
  3. Remove the affected seat cushion cover, cushion and pan.
  4. Disconnect the electrical connector from the rear tilt motor (3).
  5. Remove the screws retaining the rear tilt motor to the seat adjuster.
  6. Remove the screw and washer from the motor shaft.
  7. Remove the rear tilt motor from the seat adjuster.
scientia non olet · About LEMON Manuals