LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 291 (Electronic Power Steering (EPS) Module - Electrical Diagnostics - 1500) >> Diagnosis And Testing >> C2128-00 Ecu Reset/Recovery Occurred >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

When the ignition is turned on, the Electric Power Steering (EPS) Module checks to see if the last shutdown occurred correctly. If it did not, this DTC will be set active for the remainder of the current key cycle. The EPS Module will run normally even if this DTC is active