LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 290 (Steering System - 1500) >> Column >> Lever, Gearshift >> Removal >> Assembly

Lever, Gearshift: Removal: Assembly

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the upper and lower column shrouds. Refer to SHROUD, STEERING COLUMN, REMOVAL .
    Fig 1: Gearshift Lever Assembly
    GC0088327Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the gearshift harness connector (5).
  4. Disconnect the shift cable (3) from the gearshift lever assembly (2).
  5. Remove the gearshift lever assembly mounting screws (4).
  6. Remove the gearshift lever assembly.
scientia non olet · About LEMON Manuals