LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Rear Suspension - 1500) >> Bumper, Jounce >> Installation >> Coil Spring System

Coil Spring System

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Suspension Components
GC0088300Courtesy of CHRYSLER GROUP, LLC
  1. Install the jounce bumper (3) and twist to seat in the bracket.
  2. Remove the support and lower the vehicle.