LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 280 (Heated/Cooled Accessories (Service Information) 1500) >> Switch, Vented Seat >> Removal >> Removal

Switch, Vented Seat: Removal: Removal

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Switch Pod Fasteners
GC0087598Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the instrument panel center bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, REMOVAL .
  3. Disconnect the lower switch pod electrical connector.
  4. Remove the lower switch pod fastners(2) from the center bezel.
  5. Remove the switch pod from the center bezel.
scientia non olet · About LEMON Manuals