LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 277 (Base Brakes (Service Information) 1500) >> Hydraulic/Mechanical >> Rotor, Brake >> Removal >> Front - Heavy Duty

Front - Heavy Duty

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the wheel and tire assembly.
    NOTE:

    Do not allow brake hose to support caliper adapter assembly.

  3. Remove the caliper from the steering knuckle, and remove caliper adapter assembly. Refer to CALIPER, DISC BRAKE, REMOVAL .
  4. With Dual Rear Wheels (DRW) only, remove the extension to the rotor nuts and remove the extension.
  5. Remove the rotor from the hub/bearing wheel studs.
scientia non olet · About LEMON Manuals