LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 277 (Base Brakes (Service Information) 1500) >> Electrical >> Pump, Electric Vacuum >> Removal >> Removal

Pump, Electric Vacuum: Removal: Removal

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Mounting Bracket, Bolts, Electrical Connector, Vacuum Pump, Locking Tab & Quick-Connect Type End
GC0145468Courtesy of CHRYSLER GROUP, LLC
  1. Remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL, 3.6L , BODY, AIR CLEANER, REMOVAL, 4.7L or BODY, AIR CLEANER, REMOVAL, 5.7L .
  2. Disconnect the electrical connector (3) and remove the harness connector from the mounting bracket (1).
  3. Release the locking tab (5) and disconnect the quick connect vacuum hose (6) from the vacuum pump (4).
  4. Remove the vacuum pump bracket bolts (2) and remove the vacuum pump assembly from the vehicle.
scientia non olet · About LEMON Manuals