LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 262 (Engine Cooling System - 1500) >> Engine >> Thermostat >> Removal >> 5.7L

Section 262 (Engine Cooling System - 1500): Engine: Thermostat: Removal: 5.7L

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine Coolant Temperature Sensor & Thermostat (5.7L)
GC0087442Courtesy of CHRYSLER GROUP, LLC
WARNING:

Do not loosen the radiator draincock with the cooling system hot and pressurized. Serious burns from the coolant can occur.

  1. Disconnect the negative battery cable.
  2. Drain the cooling system. Refer to STANDARD PROCEDURE .
  3. Remove the radiator hose clamp and radiator hose (1) at the thermostat housing (3).
  4. Remove the thermostat housing mounting bolts, thermostat housing (3) and thermostat.