LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 262 (Engine Cooling System - 1500) >> Engine >> Heater, Engine Block >> Removal >> 3.6L

Heater, Engine Block: Removal: 3.6L

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing A/C Compressor
GC0154471Courtesy of CHRYSLER GROUP, LLC
  1. Remove the A/C compressor (1) and position aside. Refer to COMPRESSOR, A/C, REMOVAL .
    Fig 2: 3.6L Engine Block Heater & Cylinder Block
    GC0144482Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the power cord plug from block heater.
  3. Loosen screw (2) from the heater. Remove block heater assembly (1).
scientia non olet · About LEMON Manuals