LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 262 (Engine Cooling System - 1500) >> Engine >> Heater, Engine Block >> Installation >> 3.6L

Heater, Engine Block: Installation: 3.6L

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: 3.6L Engine Block Heater & Cylinder Block
GC0144482Courtesy of CHRYSLER GROUP, LLC
  1. Clean block core hole and heater seat.
  2. Insert heater block (1) assembly.
  3. With block heater seated, tighten screw (2) to 12 N.m (106 in. lbs.) to assure a positive seal.
  4. Install power cord plug to block heater (1).
    Fig 2: Removing/Installing A/C Compressor
    GC0154471Courtesy of CHRYSLER GROUP, LLC
  5. Install the A/C compressor (1). Tighten the upper bolts (4) to
scientia non olet · About LEMON Manuals