LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 262 (Engine Cooling System - 1500) >> Engine >> Fan, Cooling, Electric >> Removal >> 3.6L

Fan, Cooling, Electric: Removal: 3.6L

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Electric Cooling Fan
GC0154428Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the battery negative cable.
  2. Remove the upper radiator seal push pins (2).
  3. Remove the upper radiator seal plastic rivets.
  4. Remove the upper radiator seal (1).
    Fig 2: Disconnecting/Connecting Radiator Fan Electrical Connector
    GC0154451Courtesy of CHRYSLER GROUP, LLC
  5. Disconnect the radiator fan electrical connector (3).
  6. Remove the fan shroud mounting bolts (4).
  7. Remove the fan shroud's from the lower retaining clips and position the fan shroud towards the rear of vehicle and pull upwards.
scientia non olet · About LEMON Manuals