LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 262 (Engine Cooling System - 1500) >> Accessory Drive >> TENSIONER, Belt >> Installation >> 3.6L

TENSIONER, Belt: Installation: 3.6L

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Measurement A
GC0144244Courtesy of CHRYSLER GROUP, LLC
  1. An indexing slot is located on back of tensioner. Align this slot to the head of the bolt on the front cover. Install the mounting bolt. Tighten bolt to 41 N.m (30 ft. lbs.).
    Fig 2: Identifying Drive Belt (3.6L Engine)
    GC0154511Courtesy of CHRYSLER GROUP, LLC
  2. Install main drive belt (1). Refer to BELT, SERPENTINE, INSTALLATION .
scientia non olet · About LEMON Manuals