LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 262 (Engine Cooling System - 1500) >> Accessory Drive >> Pulley, Idler >> Installation >> 5.7L

Pulley, Idler: Installation: 5.7L

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Drive Belt (5.7L Engine)
GC0157446Courtesy of CHRYSLER GROUP, LLC
  1. Position the idler pulley (1).
  2. Install the idler pulley (1) bolt. Tighten the bolt to 54 N.m (40 ft. lbs.).
  3. Install the accessory drive belt (3). Refer to BELT, SERPENTINE, INSTALLATION .
scientia non olet · About LEMON Manuals