LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 262 (Engine Cooling System - 1500) >> Accessory Drive >> Belt, Serpentine >> Diagnosis And Testing >> Diagnosis And Testing - Serpentine Belt >> Noise Diagnosis

Noise Diagnosis

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Belt Wear Patterns
GC0091798Courtesy of CHRYSLER GROUP, LLC
1 - NORMAL CRACKS BELT OK
2 - NOT NORMAL CRACKS REPLACE BELT

Noises generated by the accessory drive belt are most noticeable at idle. Before replacing a belt to resolve a noise condition, inspect all of the accessory drive pulleys for alignment, glazing, or excessive end play.