Capacitor, Ignition: Installation: 4.7/5.7
WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of CHRYSLER GROUP, LLC
| 1 - COIL CAPACITOR |
| 2 - MOUNTING STUD |
| 3 - GROUND STRAP |
| 4 - MOUNTING NUT |
| 5 - ELEC. CONNECT. |
- Position capacitor (1) to mounting stud (2).
- Position ground strap (3) to mounting stud (2).
- Tighten nut (4) to 7 N.m (60 in. lbs.) torque.
- Connect electrical connector (5) to coil capacitor.