LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Ignition System (Service Information) 1500) >> Capacitor, Ignition >> Installation >> 3.6L

Capacitor, Ignition: Installation: 3.6L

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Electrical Connector, Mounting Bolt & Ignition Capacitor
GC0154074Courtesy of CHRYSLER GROUP, LLC
  1. Position capacitor (2) to the rear of the cylinder head.
  2. Tighten nut (3) to 7 N.m (60 in. lbs.).
  3. Connect electrical connector (1) to coil capacitor.
scientia non olet · About LEMON Manuals