LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 254 (Passive Entry Module (PEM) (Service Information) 1500) >> Antenna, Passive Entry >> Installation >> Rear Cabin Wall

Rear Cabin Wall

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Antenna Assembly Fasteners
GC0154639Courtesy of CHRYSLER GROUP, LLC
  1. Install both fasteners (3) to secure the LF antenna (1) in place.
  2. Reconnect the connector (2) to the LF antenna.
    Fig 2: Antenna Assembly & Connector
    GC0154346Courtesy of CHRYSLER GROUP, LLC
  3. Position the rear cabin wall in place and secure using push pins. Refer to PANEL, CAB BACK TRIM, INSTALLATION .
  4. Install left rear child seat tether. Refer to ANCHOR, CHILD SEAT, INSTALLATION .
  5. Install left rear seat. Refer to SEAT, REAR, INSTALLATION or SEAT, MEGA CAB REAR, INSTALLATION .
  6. Install the left rear seat rear inboard bolt with seat belt buckle. Refer to SEAT BELT, INSTALLATION .
  7. Flip the left rear seat cushion back into the proper position for seating.
  8. Reconnect negative battery cable to the negative terminal on the battery.