LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 254 (Passive Entry Module (PEM) (Service Information) 1500) >> Antenna, Passive Entry >> Installation >> Center Floor Console

Center Floor Console

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Antenna
GC0154620Courtesy of CHRYSLER GROUP, LLC
  1. Position the antenna to the console for installation.
  2. Install the two screws (3) that secure the antenna in place.
  3. Reconnect the wire harness connector from the connector receptacle (2) for the Low Frequency Antenna (LF).
  4. Install the center floor console to the vehicle.
  5. Reconnect the battery cable to the negative battery post.