LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 251 (Lamps/Lighting - Exterior (Service Information) - 1500) >> Lamp, Cab >> Removal >> Bulb

Lamp, Cab: Removal: Bulb

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing CAB Clearance Lamp Bulb
GC0108183Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the cab clearance lamp (1) from the roof panel. Refer to LAMP, CAB, REMOVAL .
  3. Pull the base of the bulb (3) straight out of the socket (2).
scientia non olet · About LEMON Manuals