Relay Pack, Winch: Removal: Removal

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Battery Cable Exploded View

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate battery negative cable (3).

Fig 2: Removing/Installing Winch Assembly
Courtesy of CHRYSLER GROUP, LLC
Remove the winch assembly (2). Refer to WINCH, REMOVAL .

Fig 3: Identifying Nuts, Battery Positive Cable & Bus Straps
Courtesy of CHRYSLER GROUP, LLC
Remove the nut and disconnect the red battery positive cable (1).

Fig 4: Identifying Nuts And Control Wires
Courtesy of CHRYSLER GROUP, LLC

NOTE:
Relay #4 shown in illustration, all others similar.
Remove the control wire nuts (1) and disconnect the control wires (2) from each relay.