LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Emissions Control) >> Diesel Exhaust Fluid Emissions, 6.7L Diesel >> LINE, Diesel Exhaust Fluid Pressure >> Installation >> Installation

LINE, Diesel Exhaust Fluid Pressure: Installation: Installation

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing DEF Pressure Line
GC0143716Courtesy of CHRYSLER LLC
  1. Install the DEF pressure line (2) at injector (3).
  2. Connect the DEF pressure line retainer at the frame rail and coolant lines (1).
    Fig 2: Removing/Installing DEF Pressure Line & Heater Harness Connector
    GC0143717Courtesy of CHRYSLER LLC
  3. Connect the DEF pressure line (1) at the DEF supply pump.
  4. Connect the Diesel Exhaust Fluid (DEF) pressure line heater harness connector (2).
  5. Connect both negative battery cables.
scientia non olet · About LEMON Manuals