LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 236 (DTCS P0219 To P1D93 - 8HP70 Automatic Transmission - 1500) >> Diagnosis And Testing >> P1731-Incorrect Gear Engaged >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

No shift operation and actual gear differs from the target gear. No shift operation - actual (calculated) gear differs from target (expected) gear, actual (calculated) turbine speed is greater than 300 rpm or calculated transmission ratio is above calibrated threshold. During an Upshift - actual (calculated) gear is less than target (expected) gear. During Downshift - actual (calculated) gear is greater than target (expected) gear. Exception: Actual (calculated) gear is 1st and target (desired) gear is 2nd.

scientia non olet · About LEMON Manuals