Diagnostic Test
WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
- VERIFY DTC IS ACTIVE NOTE:
For vehicle communication problems, use the scan tool to refer to the Network Review Screen. The screen depicts a high level view of the vehicle network. Fault and problem areas appear in red. Selecting any of the network components allows access to the source of the problem.
- Turn the ignition ON.
- With the scan tool, read active DTCs.
Is DTC U0101 and/or U11C3 active?
Yes
- Refer to DTC INDEX - 1500 and perform the U0002-CAN C BUS Off Performance diagnostic procedure.
No
- Refer to DIAGNOSIS AND TESTING and perform the Stored Lost Communication DTCs diagnostic procedure.