LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 231 (5.7L - DTCS P2317 To U148C - 1500) >> Diagnosis And Testing >> U11E8-Lost Communication With EPS Steering Torque Message >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) doesn't receive a torque message signal from the Electric Power Steering Module over the CAN C bus. One Trip fault. If the vehicle is equipped with the stop/start feature, the system will be disabled when this DTC is active.