LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 230 (5.7L - DTCS P1496 To P2314 - 1500) >> Diagnosis And Testing >> P2123-Accelerator Pedal Position Sensor 1 Circuit High >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) detects that the APP Sensor 1 input voltage is above the maximum acceptable value. One trip fault. If the vehicle is equipped with the stop/start feature, the system will be disabled when this DTC is active. 

scientia non olet · About LEMON Manuals