Theory Of Operation
WARNING: This page is about a different car, the 2013 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
The hood ajar status is monitored using two switches for the Electronic Stop/Start (ESS) equipped vehicles. Hood Ajar Switch one is integrated into the Hood Latch and is hard wired to the Body Control Module (BCM). The signal is sent to the Powertrain Control Module (PCM) over the CAN BUS. Hood Switch 2 is hard wired to the PCM. If the PCM detects that either switch is in the open position or is faulted for any reason, the ESS feature will be disabled during the current ignition cycle.