Diagnostic Test
WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
When Monitored:
- Ignition on, engine running.
Set Condition:
- Transmission Control Module (TCM) detects learned values are not currently in memory.
- PERFORM TCM Quick Learn
- This DTC will set if the TCM or the Transmission have been replaced.
Repair
- With the scan tool, perform the Quick Learn Procedure.
- Refer to STANDARD PROCEDURE and perform the AS68RC VERIFICATION TEST.
- This DTC will set if the TCM or the Transmission have been replaced.