LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (NV271 Transfer Case (Service Information)) >> Sensor, Position >> Removal >> Removal

Sensor, Position: Removal: Removal

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Disengage the transfer case position sensor connector from the position sensor.
  3. Remove the position sensor from the transfer case.
scientia non olet · About LEMON Manuals