LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Instrument Cluster (Service Information)) >> POD, Switch >> Installation >> Installation

POD, Switch: Installation: Installation

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Switch Pod Fasteners
GC0087598Courtesy of CHRYSLER LLC
  1. Align the switch pod to the instrument panel center bezel.
  2. Install the upper switch pod fasteners (1) to the center bezel.
  3. Connect the switch pod electrical connector.
  4. Install the instrument panel center bezel. Refer to BEZEL, Instrument Panel, Center , Installation and BEZEL, Instrument Panel, Driver Side , Installation .
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals