LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1663 (6.4L - DTCS P1696 To P2503 - 2500 Hd) >> DTC Troubleshooting >> P2181-Cooling System Performance >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The coolant temperature should change at a specific rate. If this rate is too slow or too fast this fault will set. Two trip fault. Three good trips to clear MIL. ETC light will illuminate on first trip failure. If the vehicle is equipped with the stop/start feature, the system will be disabled when this DTC is active.