LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1650 ((External Audio/Video Module - Electrical Diagnostics - 2500 Hd)) >> DTC Troubleshooting >> B142B-00-VES Unit High Temperature >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FOR AN ACTIVE DTC 

  1. Move the vehicle to a cooler location until the vehicle interior is no warmer than the ambient temperature.
  2. With the scan tool, read DTCs and record on the repair order, then erase DTCs.
  3. Turn the radio and EDM on, and wait at least 90 seconds.
  4. With the scan tool, read DTCs.

    Did the DTC return?

    Yes 

    • Replace the External Disc Module (EDM) in accordance with the Service Information.
    • Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .

    No