Switch, Rear Power Window: Operation
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
The power sliding rear window center pane of glass is driven (slides) via cables through a 2-way window motor regulator. A bi-directional switch is used to control the sliding glass which is located in the overhead console. Sliding the switch one way will operate the power sliding window pane open. Sliding the switch back will close the power sliding window pane. The pane must be unlocked in order for the power feature to function. The switch is supplied power by the BCM. The overhead console switches, bulb holders and wiring harness are serviced only as a unit and are not available individually for service.