Outlet, Power, 12 V: Removal
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the battery negative cable.
- Look inside and note position of the retaining bosses (2).
- Insert the (special tool #10246A, Remover, Power Outlet) (1) into the retaining bosses (2) of the power outlet.
- Pull out the base through the mounting ring by gently rocking the tool.
- Disconnect the harness (1) from the power outlet (2).
- Set the base aside and remove the base mount ring.