LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1632 (Power Distribution - 2500 Hd) >> Module, Power Inverter >> Removal

Module, Power Inverter: Removal

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0087767Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Release the seat cushion j-channel (1) from the seat frame to gain access to the power inverter module (2).
    GC0087768Courtesy of CHRYSLER GROUP, LLC
  3. Lift up on the seat cushion and remove the four power inverter mounting bracket retainers (1).
  4. Disconnect the power inverter electrical connector and remove the power inverter assembly from the vehicle.
    GC0087769Courtesy of CHRYSLER GROUP, LLC
  5. Remove the screws (1) holding the power inverter (2) to the mounting bracket.
  6. Remove the power inverter.
scientia non olet · About LEMON Manuals