LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1631 (Body Control Module (BCM) - DTCS B182C-12 To U1433-24 - 2500 Hd) >> DTC Troubleshooting >> C1006-13-Brake Fluid Level Input - Circuit Open >> Theory Of Operation

Theory Of Operation

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The Body Control Module (BCM) provides a reference voltage on the brake fluid level signal circuit through a pull-up resistor that is connected to battery voltage. The Brake Fluid Level Switch switches the brake fluid level signal circuit to ground when the fluid level is low. A diagnostic resistor internal to the switch is placed in parallel with the switch.

scientia non olet · About LEMON Manuals