Set Condition
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- When the Door Unlock output is off and the Body Control Module (BCM) detects less than 1.253 volts on one of the following circuits:
- Front Driver Door Unlock circuit.
- Passenger Doors Unlock Relay Control circuit.
- Secondary Lock Driver circuit.
- When the Door Unlock output is active and the Body Control Module (BCM) detects greater than 18.0 amps on one of the following circuits:
- Front Driver Door Unlock circuit.
- Passenger Doors Unlock Relay Control circuit.
- Secondary Lock Driver circuit.