LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1622 ((Final Drive Control Module (FDCM) - Electrical Diagnostics - 2500 Hd)) >> DTC Troubleshooting >> C230F-STABILZER Bar/Differential Indicator Supply Circuit Performance >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
DISCONNECTING STABILIZER BAR SWITCH
(T536) LOCKER LED SOURCE CIRCUIT OPEN OR HIGH RESISTANCE
(T532) OPEN LOCKER LED CIRCUIT OPEN OR HIGH RESISTANCE
(T533) LOCKER LED REAR CIRCUIT OPEN OR HIGH RESISTANCE
(T534) LOCKER LED FRONT/REAR CIRCUIT OPEN/HIGH RESISTANCE
FINAL DRIVE CONTROL MODULE (FDCM)
scientia non olet · About LEMON Manuals