Reservoir, Air Suspension: Description
All pressurized air suspension components contain high pressure air (up to 220 psig). Use extreme caution when inspecting for leaks. Wear safety goggles and adequate protective clothing when inspecting or servicing the air suspension system. A sudden release of air under this amount of pressure can cause possible serious or fatal injury.
Before performing any service on the air suspension system, the system must be disabled to prevent the system from changing ride height. Before any given component is to be serviced it must be deflated. Servicing the air suspension system without the system disabled, or with pressure in any specific component, can cause possible serious or fatal injury.
The air suspension reservoir assembly (1) is located on the vehicle frame rail on the right side of the vehicle. There is a schrader valve connection for filling and an air line connected to it which is part of the rear air line assembly. The reservoir is secured to the frame with two brackets.