Hose Assembly, Air Suspension: Description
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
The air suspension hose assembly (1) is located in the right front corner of the pickup box assembly between the box and the cab. It is connected to the air suspension compressor assembly.
The suction hose incorporates a filter assembly (1) for filtering the incoming air for the compressor. If water is visible inside the filter assembly (1), the air suspension hose assembly and the valve block must both be replaced. The filter assembly (1) is not serviceable alone. The air suspension hose and filter are serviced as one component.